Steel Cord Conveyor Belts
Guide Values for the Mass and Thickness
Phoenix steel cord conveyor belts for general material handling purposes with covers of type X
| Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass with cover type m"G in kg/m2 with cover type |
|---|---|---|---|
| Top side : Bottom side | X | ||
| St 400 | 4 : 4 | 10.5 | 13.0 |
| St 500 | 4 : 4 | 10.5 | 14.0 |
| St 630 | 6 : 4 | 13.5 | 17.5 |
| St 800 | 6 : 4 | 13.5 | 18.0 |
| St 1000 | 6 : 4 | 14.0 | 19.5 |
| St 1250 | 6 : 4 | 14.0 | 21.5 |
| St 1600 | 8 : 6 | 19.5 | 28.0 |
| St 1800 | 8 : 6 | 19.5 | 28.5 |
| St 2000 | 8 : 6 | 19.5 | 29.0 |
| St 2500 | 10 : 8 | 25.0 | 38.5 |
| St 3150 | 10 : 8 | 26.0 | 41.0 |
| St 3500 | 10 : 8 | 26.5 | 42.5 |
| St 4000 | 12 : 8 | 29.0 | 48.0 |
| St 4500 | 12 : 8 | 29.5 | 50.5 |
| St 5000 | 12 : 10 | 32.0 | 55.0 |
| St 5400 | 12 : 10 | 32.5 | 56.0 |
| St 6300 | 12 : 10 | 34.0 | 66.0 |
| St 7500 | 12 : 10 | 35.0 | 69.0 |
| St 8500 | 14 : 10 | 37.5 | 73.0 |
More Information about PHOENOCORD® Steel Cord Conveyor Belt
Phoenix Steel Cord Conveyor Belts with Textile Transverse Reinforcement (T) in Self-Extinguishing Version (V) for Underground Coal Mining
| Belt | Cover gauge dDp in mm | Belt thickness dG in mm |
Area related belt mass m"G in kg/m2 |
|---|---|---|---|
| Top side : Bottom side | |||
| St 1000 | 10T : 6T | 20.0 | 35.0 |
| St 1250 | 10T : 6T | 21.0 | 37.5 |
| St 1600 | 10T : 6T | 22.0 | 40.5 |
| St 2000 | 10T : 8T | 24.0 | 45.0 |
| St 2500 | 10T : 8T | 25.0 | 49.0 |
| St 3150 | 10T : 8T | 26.0 | 52.0 |
| St 3500 | 10T : 8T | 27.0 | 55.0 |
| St 4000 | 12T : 8T | 29.0 | 60.0 |
| St 4500 | 12T : 8T | 30.0 | 63.0 |
| St 5000 | 12T : 8T | 31.0 | 68.0 |
| St 5400 | 12T : 8T | 31.0 | 69.5 |
| St 6300 | 12T : 10T | 34.0 | 78.0 |
| St 7500 | 14T : 10T | 37.0 | 83.0 |
| St 8500 | 14T : 12T | 39.5 | 86.0 |
Explanation for the tabular sections
Area related belt mass m"G
Data on the size parameter m"G apply only for the cover gauges as listed providing the following range of tolerances:
Tabular section 1.1 +1.7/-1.0 kg/m2
Tabular section 1.2 +/- 2.2 kg/m2
Tabular section 2.1 +1.2/-0.6 kg/m2
Tabular section 2.2 +1.5/-0.8 kg/m2
With other cover gauges, the following deviations per mm cover result:
Cover type X 1.10 kg/m2
Cover type Y 1.15 kg/m2
Cover type V 1.50 kg/m2
From the area related mass of the conveyor belt m"G the length related mass m’G can be calculated, taking into account belt width B in m according to the following equation:
Belt thickness dG
The data on belt thickness dG only apply for the cover gauges as listed above with a tolerance range of + 1.0/-0.5 mm for all tabular sections.
The thickness of the belt carcass dGk can be calculated, taking the total cover gauge of top and bottom sides dDpges according to the following equation:
PHOENOCORD® Steel Cord Conveyor Belt